Відео

Thanks for your questions. Splicing is doable, but not recommended. The better option is to upsize the wrap one size to easily slide over the external restraints where needed.

@McWaneDuctilePipe appreciate the prompt reply cheers!

Sorry, I don't understand your question.

Indeed. As opposed to a Wet Tap where the pipe is in use and full of water.

Thanks. #IronStrong!

There is an inverse relationship between gas pressure and volume known as Boyle's Law. That's why it's so important to remove air from your line. It will effect results and can be dangerous.

@@McWaneDuctilePipe agreed. It can also affect flow, and cause damage.

Thanks for your question. The furnace is hot blast, but there is no recuperator.

@@McWaneDuctilePipe thank you for the reply! I have another technical question... if the recuperator is not present, how is the hot blast generated? Is there a gas boiler?Thanks again and congratulations on your beautiful company.

That's cool that pipe casting has influenced how EV batteries are made. Thanks for sharing. Someone tell #DIPRA.

It sure is!

Thanks for watching!

Any time

Thanks for the comment. We'll keep em coming.

Thanks for sharing your experience.

A good point... this video is from the early days. Our How to Install a Tyton Joint video shows the insertion step better. Check this link if you are still looking for tips. Thanks for your comment. ua-cam.com/video/0xWIa_29BMY/v-deo.htmlsi=hWo4Ay0wz3i6vjZD&t=54

That is correct. Cutting grease is not required.

You're welcome!

Thanks for your question. All our coatings are supplied by Induron. You'll have to reach out to them to see if they have a product that suits your needs. www.induron.com Good luck.

Thank you very much!

Happy you enjoyed it. Please check out some of our other videos.

आपकी टिप्पणी के लिए धन्यवाद। हमने उपशीर्षक प्रदान किये हैं। क्या वे ग़लत हैं?

Thanks. We have an incredible team and are proud of our #IronStrong American made pipe.

Thanks for your question. Here's a little info about our Zinc coated pipe. The zinc coating forms a protective zinc oxide dielectric barrier. Zinc by-products, which are left behind after reacting in aggressive soils, form a healing protective barrier that cuts off further corrosion. Although zinc is an enhancement to protecting McWane Ductile Iron Pipe from corrosion, it does not provide stand-alone corrosion protection. McWane Ductile Zinc Coated Pipe consists of a layer of arc-applied or paint-applied, 99.99% pure zinc coating, having a mass of 200g/m².

@@McWaneDuctilePipe any zinc coating operator or Bitumen Coating operator vacancy available? I'm from India Working in Jindal Saw Gulf LLC Ductile iron company as a Bitumen Coating Operator.

#SafetyFirst #PPESavesLives

You can believe that if you wish, but you’ll be working in a Hole and Wrenches will dent your head. Train like you work. Always wear your PPE.

Happy to help. Please let us know if you have any questions.

Thanks for watching. Let us know if you have any questions.

Thanks for your question. We have relationships with local distributors when exporting internationally.

Thanks for the compliment. Stay tuned for more.

@@McWaneDuctilePipe just put some ductile in the ground today as a matter of fact and no leaks 👍

#IronStrong!

Lo siento, no entiendo tu pregunta. ¿Podrías volver a preguntar?

As of Jan 2024, McWane Ductile has several openings for skilled workers in Coshocton, OH; Phillipsburg, NJ; and just up the road a bit in Provo, UT. Not sure what's offered near you, but maybe check in with your HR dept and see if they have any apprenticeship openings available. Best of luck to you.

These men and women are #IronStrong to the core. Thanks for your comment.

Indeed. Thanks for the comment.

You are so welcome! Good luck with the job.

Yes indeed. Per AWWA C151 (Ductile Iron Pipe, Centrifugally Cast) each pipe receives its own hydrostatic test during the production process of at least 500-psi.

Thanks for your question. The answer is no. Makeup water is only added & evaluated AFTER the completion of the specified testing time frame. Makeup water is generally how you gauge if there is an active leak or not. There should be nothing added and no pump action occurring during the test period itself.

Thanks for the positive feedback. #IronStrong!

A nice tip from an installation pro. Thanks for your comment.

A good point, cleanliness is key. Thanks for watching, stay tuned for more content.

Thanks for watching and commenting. #IronStrong

You're welcome. Thanks for watching. Spread the word.

Hi. You can find out about openings here: mcwaneductile.com/about/careers/ However, we are the pipe maker not the installer. We make these videos to provide valuable tips, product information, and industry news to our clients. Thanks for watching. Good luck with your career.

The rope is simply meant to provide a visible representation of the pipe as it would react, or wiggle, with the thrust forces generated on either side of a change in direction via a bend. The thrust force will ultimately dissipate due to the various conditions in which the pipe is installed. The movement in the rope was approx. 85 feet in the demo, and that is just an arbitrary number used to show the “wiggle zone”, or the footage that would need to be restrained to keep the pipe connected.

Glad it was helpful. Stay tuned for more.

Glad you like them! Thanks.

With a melting point over 2000 degrees F, and annealing requirements to create the correct microstructure, producing Ductile iron on a DIY level is very difficult.

A shell core uses sand with silica, resin, and other binding materials. The box is heated to around 350-420 degrees. Sand is blown in and the box stays shut while cores are curing. After curing, remove the core, file the seams, and spray with coating. Then, the core will be ready to send to casting. Thanks for the question.

I don't think I can help you without more information.

#FerFort #IronStrong

#FerFort #IronStrong

That level of skill requires practice and dedication to the craft.

At my shop they set up mock pipes (scrap pipe). Cap both ends fill with water to about 40 to 50 psi. Then they do multiple taps on that pipe and are timed. Doing it in a live environment down in a hole wouldn’t be safe to rush through it that fast. Not saying we couldn’t do it but it would be very dangerous if anything where to go wrong like a pipe burst from drilling to fast with to much pressure on the bit. Or the saddle is to tight. When you in the hole regardless of the soil type A,B, or C it’s smart to take your time to make sure no steps are skipped or you cause a blow out on accident because of the paise they go in competition. They do they tap team competition by use at watercon every year.

You have a sharp eye Joseph. Keep it tidy out there.